Tämä sivusto käyttää evästeitä. Sivuston selaaminen hyväksyt jatkuvan evästeiden käytön. Lisätiedöt

Motul 5100 Ester 4T 15W-50, 4L

2-5 Päivää Motul 5100 Ester 4T 15W-50, 4L

Ilmainen toimitus

Jos ostoksesi ylittää € 40,00, on kuljetus Viro sisällä meidän kustannuksellamme (Omniva ja SmartPOST). 

  • €44.45
  • Veroton: €36.44

Motul 5100 Ester 4T 15W-50

TYPE OF USE
Street & road bikes, trails, off road bikes, enduro, trial…fitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2 or Euro 3 emission regulation, fitted with exhaust gas after treatment systems : catalytic converters, air injection into exhaust pipe...
Recommended for specific BMW, DUCATI engines requiring SAE 15W-50 viscosity grade oil.
Other uses: street bikes without catalytic converters, ATV’s, UTV’s…
PERFORMANCE
STANDARDS API SM / SL / SJ / SH / SG
SPECIFICATION JASO MA2 under N° M033MOT114
Protection
Technosynthese® lubricant reinforced by Ester base stock to warranty anti-wear properties and improve gear protection and life time.
Improved oil film resistance at high temperatures.for engine durability.
Grade 50 at hot temperature, specially designed for big bore engines, thumpers, twins, multicylinders…
Optimized Phosphorus and Sulphur content (JASO MA2 < 1200 ppm) for better operating conditions of catalytic converters.
The innovative anti wear additives package provides excellent gearbox protection. FZG Gear Test
results: Pass FLS 14. The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates fluid lubricating and wear protection properties at the interface of a loaded set of gears.
Comfort
JASO has created its own 4-stroke motorcycle standard -JASO T903- which has three grades MA, MA1 and MA2.
JASO MA2 offers the most efficient friction levels to guarantee the clutch engagement during the three riding modes: Starting, Acceleration and Constant Speed.
RECOMMENDATIONS
Drain interval : according to manufacturers’ recommendations and tune to your own use.
Can be mixed with synthetic or mineral lubricants.
PROPERTIES
Colour Visual Green
Viscosity grade SAE J 300 15W-50
Density at 20°C (68°F) ASTM D1298 0.877
Viscosity at 40°C (104°F) ASTM D445 138.7 mm²/s
Viscosity at 100°C (212°F) ASTM D445 18.3 mm²/s
Viscosity Index ASTM D2270 148
Pour point ASTM D97 -30°C / -22°F
Flash point ASTM D92 232°C / 449°F
TBN ASTM D2896 7.5 mg KOH/g

Kirjoita arvostelu

HUOM: HTML-koodia ei käännetä!
    Huono           Hyvä