Tämä sivusto käyttää evästeitä. Sivuston selaaminen hyväksyt jatkuvan evästeiden käytön. Lisätiedöt

Motul 7100 4T 10W-30, 4L

2-5 Päivää Motul 7100 4T 10W-30, 4L

Ilmainen toimitus

Jos ostoksesi ylittää € 40,00, on kuljetus Viro sisällä meidän kustannuksellamme (Omniva ja SmartPOST). 

  • €74.94
  • Veroton: €61.43
Motul 7100 4T 10W-30
High performance lubricant for bikes
100% Synthetic – Ester
TYPE OF USE
High performance bikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial…fitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2 or Euro 3 emission regulation, fitted with exhaust gas after treatment systems : catalytic converters, air injection into exhaust pipe...
Other uses : street bikes without catalytic converters, scooters, ATV, mopeds...
Suitable for specific HONDA & YAMAHA engine requiring SAE 10W-30 viscosity grade oil.
PERFORMANCE
STANDARDS API SL / SJ / SH / SG
APPROVAL JASO MA under N° M033MOT077
Protection
Ester Technology :
- Low traction coefficient Ester to minimise engine internal friction losses and improve performance
- Synergy of Ester with anti-wear additives and improved shear resistance for improved gear protection and life time.
100% Synthetic lubricant for improved oil film resistance at high temperatures and high revs.
Low Phosphorus and Sulphur content for better operating conditions of catalytic converters required to meet last emission regulation.
JASO MA approved to warranty a perfect lock up of wet clutch at take off, acceleration and full speed.
Easy gear shifting.
RECOMMENDATIONS
Drain interval : according to manufacturers’ recommendations and tune to your own use.
Can be mixed with synthetic or mineral lubricants.
PROPERTIES
Colour Visual Red
Viscosity grade SAE J 300 10W-30
Density at 20°C (68°F) ASTM D1298 0.861
Viscosity at 40°C (104°F) ASTM D445 73.5 mm²/s
Viscosity at 100°C (212°F) ASTM D445 11.4 mm²/s
Viscosity index ASTM D2270 147
Pour point ASTM D97 -33°C / -27.4°F
Flash point ASTM D92 232°C / 449.6°F
TBN ASTM D2896 8.0 mg KOH/g

Kirjoita arvostelu

HUOM: HTML-koodia ei käännetä!
    Huono           Hyvä